NOTE: This printer has 2 power switches: one switch is located behind the Front Cover and the other power switch is located below the Control Panel.

  1. Press the power switch below the Control Panel to the off position. A warning message will be displayed on the Touch Screen that the printer is powering off.

    Main power switch

  2. Open the Front Cover and press the other power switch to the off position.

    Power switch

  3. After the Touch Screen is blank and all the lights are out, wait one minute.
  4. Press the black reset switch found in the back of the copier when the cord is attached, or the white reset button which ever one your machine has.

    Reset Switch 

    Reset Button


    NOTE: The GFI Breaker is located next to the power cord on the back of the machine.

  5. Press the power switch behind the Front Cover to the on position, and then close the cover.
  6. Press the power switch below the Control Panel to the on position.